• Very clever and efficient cabinet design (BYOAC link)

http://forum.arcadecontrols.com/index.php/topic,119909.msg1270816.html#msg1270816

WORK IN PROGRESS- Dec 2012

mini- Robotron-

Super mini-

Sideview of super-mini cabinet-

Cabinet Shell- http://youtu.be/FSWpaVjFo6A

JROK Shell-

Priming the cabinet- http://youtu.be/Y9BoZQzlAwg

LCD monitor- http://youtu.be/Cu2KJfTMyEg

Speaker- http://youtu.be/jWgHhAJ_r0I

Power Supply- http://youtu.be/yBXSzOwt-x0

PCB- http://youtu.be/tojtqQxv_KM

Control Panel- http://youtu.be/fwGcK0e7kh0

60-1 Control Panel-

Jamma Harness Part 1- http://youtu.be/GDnbE-mb368

Wiring Part 2- http://youtu.be/ejcCUVJxSDA

Test the electronics- http://youtu.be/eoFMeJt2KAM

Sticking the electronics on the LCD shelf-

Wiring up the electronics to the harness-

Shelf for LCD (using old control panel board)-

Trackball wiring-

60-1 trackball connector-

jrok lcd info

Red wire to pin 1 (to Jamma Red)
Orange wire to pin 2 (to Jamma
Green)
Green wire to pin 3 (to Jamma Blue)
White wire to pin 6 (to Jamma
Video GND)
Yellow wire to pin 13 (to Jamma Video Sync)

 


Copyright © 2012. All Rights Reserved.